超声光栅测声速

介绍了超声光栅测声速的实验，澄清了实验中的一些问题，并讨论了包括声压大小对实验结果的影响以及时间的累积对实时光栅产生的影响等问题，用数值分析的方式给予解答。     

高速走丝电火花线切割表面条纹的成因研究

分析了高速走丝电火花线切割加工时可通过电极丝空间位置稳定性的改善及选用具有良好洗涤能力的工作介质进行条纹消除的机理.并研究指出在大能量切割时,选用复合工作液以喷射的方式进行冷却,可以大大提高极间的洗涤性能,达到消除表面烧伤纹的目的.     

Use of the ASTER satellite images for evaluation of structural changes in the Popocatépetl volcano related to microseismicity

Mexico is one of the most volcanically active regions in North America. Volcanic activity in central Mexico is associated with the subduction of the Cocos and Rivera plates beneath the North American plate. Periods of enhanced microseismic activity, associated with the volcanic activity of the Popocatépetl volcano are compared with periods, during which the microseismic activity was low. We detected systematical changes in the number of lineaments, associated with the microseismic activity due to lineament analysis of a temporal sequence of high resolution satellite images of the Popocatépetl volcano, provided by the ASTER/VNIR instrument. The Lineament Extraction and Stripes Statistic Analysis (LESSA) software package was used for the lineament extraction. In the future it would allow develop a methodology for detection of possible elevation of pressure in volcano edifice.     

Dynamical evolution of high area-to-mass ratio debris released into GPS orbits

A large set of simulations, including all the relevant perturbations, was carried out to investigate the long-term dynamical evolution of fictitious high area-to-mass ratio (A/M) objects released, with a negligible velocity variation, in each of the six orbital planes used by Global Positioning System (GPS) satellites. As with similar objects discovered in near synchronous trajectories, long lifetime orbits, with mean motions of about 2 revolutions per day, were found possible for debris characterized by extremely high area-to-mass ratios. Often the lifetime exceeds 100 years up to A/M ∼ 45 m²/kg, decreasing rapidly to a few months above such a threshold. However, the details of the evolution, which are conditioned by the complex interplay of solar radiation pressure and geopotential plus luni-solar resonances, depend on the initial conditions. Different behaviors are thus possible. In any case, objects like those discovered in synchronous orbits, with A/M as high as 20–40 m²/kg, could also survive in this orbital regime, with semi-major axes close to the semi-synchronous values, with maximum eccentricities between 0.3 and 0.7, and with significant orbit pole precessions (faster and wider for increasing values of A/M), leading to inclinations between 30° and more than 90°.     

Leakage performance of floating ring seal in cold/hot state for aero-engine

Rotating experimental investigations were carried out to study the oil sealing capability of two different floating ring seals in cold/hot state for aero-engine. High-speed Floating Ring Seal(HFRS) is a seal with the inner diameter of 83.72 mm and maximum speed of 38000 r/min, and Low-speed Floating Ring Seal(LFRS) is another seal with the inner diameter of 40.01 mm and maximum speed of 18000 r/min. In hot state, sealing air with the temperature of 371 K and oil with the temperature of 343 K was employed to model the working conditions of an aero-engine. Comparisons between floating ring seal and labyrinth seal were done to inspect the leakage performance.More attention was paid to the critical pressure ratio where the oil leakage began. Results show that the critical pressure ratio in cold state is obviously larger than that in hot state for both seals. An underlying sealing mechanism for floating ring seal is clarified by the fluid film, which closely associates with the dimensionless parameter of clearance over rotating diameter(2 c/Dr). Another fantastic phenomenon is that the leakage coefficient in hot state, not the leakage magnitude, is unexpectedly larger than that in cold state. Overall, the leakage performance of the floating ring seal is better than the labyrinth seal.     

基于深度学习的混合翼型前缘压力分布预测

提出了一种基于深度学习的混合翼型前缘压力分布预测方法，通过对翼型几何特征提取、压力分布曲线的参数化，建立了卷积神经网络模型（CNN），并利用计算流体力学（CFD）的计算结果作为其训练样本，实现对混合翼型前缘压力分布的预测。结果表明:两种方法计算结果的拟合优度大于0.98，基于深度学习的计算方法耗时1.7 s，CFD方法耗时大于50 s，计算时间大大缩短。该方法能够在满足计算精度的条件下提高计算效率并可应用于其他的翼型设计过程。      

2级脉冲爆震发动机中超声速射流对撞诱导激波聚焦试验研究

为研究2-St age PDE中连续超声速射流及结构参数对撞诱导激波聚焦的影响规律,在冷态条件下开展了2-St age PDE中连续超声速射流对撞诱导激波聚焦的试验。分析了喷口宽度、导流环深度、凹面腔开口端与喷管间距、尾喷管角度、射流入射压力等参数对凹面腔底部峰值压力的影响。结果表明:喷口宽度、导流环深度、凹面腔开口端与喷口间距、射流入射压力越大,凹面腔底部峰值压力越大,激波聚焦效果越好;尾喷管角度越大,凹面腔底部峰值压力越小,激波聚焦效果越差;喷口宽度、导流环深度、射流入射压力对激波聚焦的影响较大。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

脉动压力测量技术在火箭发动机试验中的应用

为研究和探索火箭发动机地面试验推力室脉动压力测量方法和数据分析技术,介绍了火箭发动机试验中脉动压力测量系统的组成和参数的测量方法;分析了引压导管的动态特性及其对脉动压力参数测量的影响;采用齐平安装的方式,按照所述方法建立脉动压力参数测量系统;结合推力室多个振动测点的数据,分别采用快速傅里叶变换(FFT)和小波包分解两种方法对脉动压力数据进行分析。根据两种方法的分析结果推断发动机在径向和切向产生了不稳定燃烧。对探索和推广脉动压力测量技术在火箭发动机试验和其他组合件试验中的应用具有重要意义。